When Motorcycle Clutch Accessories need to be replaced mainly depends on the following three points:
1. Look at the thickness
When the thickness of the Motorcycle Clutch Accessories is less than the minimum replacement standard allowed in the vehicle manual, it should be replaced in time. Generally, the thickness of new Motorcycle Clutch Accessories is about 1cm. When the Motorcycle Clutch Accessories are worn to only 0.5cm, the frequency of self-inspection must be increased. When the wear of the Motorcycle Clutch Accessories reaches the thickness warning iron plate, that is, the thin replacement limit is 0.3cm, it must be replaced in time, otherwise its braking performance will be significantly reduced, affecting driving safety.
2. Listen to the sound
When the alarm plate of the motorcycle clutch accessory comes into contact with the brake disc and makes a screeching or roaring sound of metal friction, or the trip computer alarm indicator light continues to light up or flashes, and an alarm sound is emitted, it proves that the motorcycle clutch accessory has exceeded the limit. It needs to be replaced when necessary.
3. Check the intensity
When the Motorcycle Clutch Accessories become thinner, the braking effect will be affected. At this time, the brake pedal needs to be pressed deeper to achieve the braking effect that can be achieved by lightly pressing on it. The braking effect is significantly weakened in the first half of the journey, and many people feel that their brakes It becomes soft and a little unable to brake. At this time, you should check whether the Motorcycle Clutch Accessories need to be replaced.
In addition, if Motorcycle Clutch Accessories are contaminated by large areas of grease,
Engine Accessories fall off, come off blocks or break, Motorcycle Clutch Accessories are worn, deformed or unevenly worn, the steel back of Motorcycle Clutch Accessories is damaged, brakes fail, etc., you must Check and replace Engine Accessories promptly.
When the Motorcycle Clutch Accessories are worn to 0.3cm, they must be replaced. When the Engine Accessories make a harsh sound of metal friction, they must be replaced. When the brakes become soft and cannot stop, they must be replaced at this time, etc.
