Motorcycle universal two-way gear shift lever

We all know that the Motorcycle Brake Lever is a complete Vehicle Accessories for changing gears. How to engage the Motorcycle Vehicle Accessories during riding: First, turn up the accelerator slightly to let the engine speed up, then quickly turn off the accelerator, hold the clutch with the left hand to the end, quickly pick up/step on the gear lever with the left foot, lift the foot after picking up/stepping on it, return to the normal riding state, and then quickly release/refuel the clutch and accelerator at the same time, thus completing the engagement. Picking off/downshifting during riding: first turn off the accelerator, use inertia to ride forward, hold the clutch with your left hand to the end, and quickly step on the gear lever with your left foot. After stepping on the lever, you will return to the normal riding state. At this time, the clutch can not be loosened and slide forward by inertia. If the speed drops too much, you need to loosen the clutch and refuel. Some people are used to pressing the clutch and releasing the accelerator when the speed is fast, which can save fuel; Some people are used to not pinching the clutch and just releasing the accelerator, which will reduce the speed a lot because the engine is involved in braking. Whether to pinch the clutch depends on the speed when braking. If you are skilled at the front and rear brakes, you can pinch the clutch, release the accelerator, and reduce the speed by the brake system alone; If it is an emergency brake, you can not pinch the clutch (use the braking effect of the engine to decelerate), and the front and rear brakes are put into use (do not brake hard). The accelerator is relaxed, which will quickly reduce the speed, but you need to hold the handlebars steady, otherwise it is easy to lose control of sideslip.