Common starting lever for various motorcycles

Normally, the engine is a Vehicle Accessories that can be started by stepping on the Motorcycle Brake Lever two or three times dry after being prepared for starting under cold conditions, and can be started by stepping on the brake lever one or two times under hot conditions. When the weather is cold, in order to write more rich combustible mixture into the cylinder, the ignition switch can be disconnected, the float dust remover of the vaporizer can be turned off, so that the float can be filled with gasoline, the air valve can be turned down, the starting lever can be stepped on four or five times, then the accelerator can be turned on, the ignition switch can be turned on, and the engine can be started. If the starting pedal can not be started after several times of stepping on, the engine can be started after a short time. When the engine is in the hot state, it is generally not expected to provide an overly rich mixer, otherwise the engine cannot be started. If the engine cannot be started due to too much mixture, turn the throttle knob inward to open all the throttle valves of the vaporizer, fully step on the starting pedal, so that the engine will discharge the excess and too rich mixture out of the engine. Learn more about Motorcycle Vehicle Accessories, which will help you to use your motorcycle more easily.